MT-V5311 xDSL SOC
VDSL2/ADSL2+ PHY for CO and CPE
The MT-V5311 is Metanoia’s latest generation of VDSL2 product designed to meet the needs of both today’s FTTB (Fiber to the building) / FTTC (Fiber to the curb) applications and future FTTdp (Fiber to the distribution point) applications.
MT-V5311 supports all the VDSL2 profiles defined by ITU-T G.993.2 and additional features, such as G.inp (G.998.4) and G.vector (G.993.5). The chipset allows our customers to design a flexible system that can be seamlessly deployed in an environment with mixed deployments.
Metanoia’s MT-V5311 is a VDSL2 PHY chip especially suitable for Small Form-Factor Pluggable (SFP transceiver) design. This SFP design enables Service Providers to provide several types of access network services using the same CPE (Customer-Premises Equipment) Gateway. Leveraging Metanoia’s MT-V5311 within a SFP module leads to a competitive and cost-effective solution for Service Providers which not only ensures interoperability but also enables the possibility of an easy, low cost and seamless upgrade in future.
|VDSL2 Transmission Mode|
|Band Plan||ITU-T G.933.2 with 6 bands (30 MHz)|
|Profile||US0 band support 8a, 8b, 8c, 12a, 12b, 17a, 30a|
DS / US : 200 Mbps / 100 Mbps
DS / US : 250 Mbps / 50 Mbps
|Frequency Plan||Annex A (998), Annex B (997, 998), Annex C|
|PBO||UPBO & DPBO|
|NTR/ToD||Network Timing Synchronization|
|OLR||Bit Swapping, SRA, SOS, Dynamic Interleaver Depth (D) change|
|Latency||Dual Latency and Dual Bearer|
|ADSL2/2+ Transmission Mode|
|Data Rate||DS / US: 24 Mbps / 1 Mbps|
PTM Mode (CPE)
ATM Mode (CPE)
|Advanced ITU Features|
|G.vector||Cross Talk Elimination (G.993.5)|
|ROC||Robust Overhead Channel|
|QoS||Flexible packet sorting based on EtherType VLAN ID or VLAN priority|
|EBM||Ethernet Boot Management|
|MAC||MII / SMII / RGMII / GMII|
|Host / Master||HPI & SPI|
- EBV-V5311BXVA – xDSL bridge board
The board provides fast and simple broadband access to the Internet and a shared connection for multi-users. It allows accessing the Internet via xDSL and Ethernet technologies. xDSL support profiles are VDSL2 17A/ADSL2/ADSL2+ for xDSL board and VDSL2 30A for VDSL only board)
The board is equipped with a xDSL port to connect to a high-speed xDSL line, and 2 10/100/1000 Mbps Ethernet ports to connect additional devices that need to access the network.
DSLmonitor _Lite is the associated software application which users can use to check out and monitor xDSL data status. DSLmonitor_Lite supports USB and EVB access.